• ACS 600, ACS 800 User’s Manual


  •   
  • FileName: en_aca635_um_and_update_D.pdf [read-online]
    • Abstract: ACS 600, ACS 800 User’s ManualThis manual includes• SafetyACA 635 IGBT Supply Sections• Commissioning of the 260 to 4728 kVASupply Section with ISU• Functional Description

Download the ebook

ACS 600, ACS 800 User’s Manual
This manual includes
• Safety
ACA 635 IGBT Supply Sections
• Commissioning of the 260 to 4728 kVA
Supply Section with ISU
• Functional Description
ACS 800-17 Line-side Converter
• Parameters 120 to 1385 kVA
• Fault Tracing
• Technical Data
ACS 600 MultiDrive Manuals (Air-cooled Units, English Originals)
GENERAL MANUALS FIRMWARE MANUALS FOR DRIVE APPLICATION PROGRAMS
(appropriate manual is included in the delivery)
*Safety and Product Information EN 63982229
• Complete general Safety Instructions System EN 63700177
• Technical data for DSU and TSU supplies and Drive Sections: ratings, • Commissioning of the System Application Program
power losses, dimensions, weights, fuses etc. • Control Panel use
• Software description
*System Description EN 63700151 • Parameters of the System Application Program
• General description of ACS 600 MultiDrive • Fault tracing
• Terms
*Hardware Manual EN 63700118
• General Safety Instructions Application Program Template EN 63700185
• Hardware description of the Drive Section • Commissioning of the Drive Section
• Cable selection • Control Panel use
• ACS 600 MultiDrive mechanical and electrical installation • Software description
• Hardware commissioning of the Drive Section • Parameters
• Preventive maintenance of ACS 600 MultiDrive • Fault tracing
• Terms
ACS 600 MultiDrive Control Electronics LED Indicators
EN 64289721 Standard EN 61201441
• LED descriptions • Control Panel use
• Standard application macros with external control connection diagrams
**Modules Product Catalogue EN 64104268 • Parameters of the Standard Application Program
• Supply Unit components • Fault tracing
• Drive Unit components • Fieldbus control
• Dynamic Braking Units Note: a separate Start-up Guide is attached
• DriveWare information
• Dimensional drawings Crane Drive EN 3BSE 011179
• Single line diagrams • Commissioning of the Crane Drive Application Program
• Auxiliary power consumption • Control Panel use
• Master component tables • Crane program description
• Parameters of the Crane Drive Application Program
**Modules Installation Manual EN 64119010 • Fault tracing
• Cabinet assembly
• Wiring CONTROL SECTION MANUALS (delivered with optional Control Section)
**Grounding and Cabling of the Drive System EN 61201998 Advant Controller 80 User’s Manual EN 64116487
• Grounding and cabling principles of a variable speed drive system • AC 80 hardware and connections
• AC 80 software
**EMC Compliant Installation and Configuration for a Power Drive • Programming
System EN 61348280 • Diagnostics
* Included with cabinet-assembled systems only Advant Controller 80 Reference Manual PC Elements EN 64021737
** Included in Modules deliveries only • Description of PC and DB elements
SUPPLY SECTION MANUALS (depending on the supply type one of these Advant Controller 80 Reference Manual TC Elements EN 64331868
manuals is included in the delivery) • Description of TC elements
Diode Supply Sections User’s Manual (DSU) EN 61451544 BRAKING SECTION MANUAL (delivered with optional Braking Section)
• DSU specific Safety Instructions
• DSU hardware and software descriptions ACA 621/622 Braking Sections User’s Manual EN 64243811
• DSU commissioning • Installation, Start-up, Fault tracing,Technical data
• Earth fault protection options • Dimensional drawings
Thyristor Supply Sections User’s Manual (TSU) EN 64170597 MANUALS FOR OPTIONAL EQUIPMENT (delivered with optional
• TSU operation basics equipment)
• TSU firmware description
Fieldbus Adapters, I/O Extension Modules, Braking Choppers etc.
• TSU program parameters
• Installation
• TSU commissioning
• Programming
• Fault tracing
IGBT Supply Sections User’s Manual EN 64013700
• Technical data
• ISU specific Safety Instructions
• Main components of ISU
• ISU ratings
• ISU power losses
• ISU dimensions and weights
• ISU fuses
• ISU program parameters
• Earth fault protection options
ACA 635 IGBT Supply Sections
260 to 4728 kVA
ACS 800-17 Line-side Converter
120 to 1385 kVA
User’s Manual
This manual concerns the ACS 600 MultiDrive
supply sections (ACA 635) equipped with an IGBT
Supply Unit and ACS 800-17 drives.
3BFE 64013700 REV D
EN
EFFECTIVE: 07.07.2003
2003 ABB Oy. All Rights Reserved.
Safety Instructions
Overview The complete safety instructions for the ACA 6xx in Safety and Product
Information (EN code: 63982229) and for the ACS800-17 in Hardware
Manual (EN code: 64638505) must be followed when installing,
operating and servicing the drives. Study the complete safety
instructions carefully.
Installation and These safety instructions are intended for all who work on the ACA 6xx
Maintenance Safety or the ACS 800-17. Ignoring these instructions can cause physical
injury or death.
WARNING! All electrical installation and maintenance work on the
drive should be carried out by qualified electricians.
Any installation work must be done with power off, and power is not to
be reconnected unless the installation work is complete. Dangerous
residual voltages remain in the capacitors when the disconnecting
device is opened. Wait for 5 minutes after switching off the supply
before starting work. Always ensure by measuring that the voltage
between the terminals UDC+ and UDC- and the frame is close to 0 V
and that the supply has been switched off before performing any work
on the equipment or making main circuit connections.
If the main circuit of the inverter unit is live, the motor terminals are also
live even if the motor is not running!
Open switch fuses of all parallel connected inverters before doing
installation or maintenance work on any of them. These switch fuses
are not included in the the ACS 800-17.
When joining shipping splits, check the cable connections at the
shipping split joints before switching on the supply voltage.
If the auxiliary voltage circuit of the drive is powered from an external
power supply, opening the disconnecting device does not remove all
voltages. Control voltages of 115/230 VAC may be present in the digital
inputs or outputs even though the inverter unit is not powered. Before
starting work, check which circuits remain live after opening of the
disconnecting device by referring to the circuit diagrams for your
particular delivery. Ensure by measuring that the part of the cabinet you
are working on is not live.
ACA 635 IGBT Supply Sections, ACS800-17 iii
Safety Instructions
The control boards of the converter unit may be at the main circuit
potential. Dangerous voltages may be present between the control
boards and the frame of the converter unit, when the main circuit
voltage is on. It is critical that the measuring instruments, such as an
oscilloscope, are used with caution and safety as a high priority. The
fault tracing instructions give special mention of cases in which
measurements may be performed on the control boards, also
indicating the measuring method to be used.
Live parts on the inside of doors are protected against direct contact.
Special safety attention shall be paid when handling shrouds made of
sheet metal.
Do not make any voltage withstand tests on any part of the unit while
the unit is connected. Disconnect motor cables before making any
measurements on motors or motor cables.
WARNING! Close switch fuses of all parallel connected inverters
before starting the drive.
Do not open the drive section switch fuses when the inverter is
running.
Do not use Prevention of Unexpected Start for stopping the drive
when the inverter is running. Give a Stop command instead.
CAUTION! Fans may continue to rotate for a while after the
disconnection of the electrical supply.
CAUTION! Some parts like heatsinks of power semiconductors and
toroidal cores on motor cables inside the cabinet remain hot for a while
after the disconnection of the electrical supply.
Automatic Resets
WARNING! If an external source for start command is selected and it is
ON, the drive will start immediately after fault reset.
iv ACA 635 IGBT Supply Sections, ACS800-17
Safety Instructions
Dedicated Transformer
WARNING! Frame size R11i and above must be supplied with a
transformer dedicated to drives and motors or equipment of equal or
higher power, or with a transformer equipped with two secondary
windings, one of which is dedicated to drives and motors. Resonances
might occur if there is capacitive load (e.g. lighting, PC, PLC, small
power factor compensation capacitors) in the same network with the
drive. The resonance current might damage some unit in the network.
Medium voltage network
Supply transformer
Neighbouring network
Low voltage Low voltage
Other load than
Motors Drive
drives and motors
Other drives
or
Medium voltage network
Supply transformer
Low voltage
Other load than Drive
drives and motors
Other drives and
motors
ACA 635 IGBT Supply Sections, ACS800-17 v
Safety Instructions
vi ACA 635 IGBT Supply Sections, ACS800-17
Table of Contents
ACS 600 MultiDrive Manuals (Air-cooled Units, English Originals)
Safety Instructions
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Installation and Maintenance Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Automatic Resets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Dedicated Transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Table of Contents
Update Notice for ACA 635 IGBT Supply Sections 260 to 4728 kVA
ACS 800-17 Line-side Converter 120 to 1385 kVA
ACS 800-17 Line-side Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Chapter 1 - About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Chapter 2 - Operation Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Chapter 3 - Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Chapter 8 - Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Appendix A - Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Appendix B Circuit Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Chapter 1 – About this Manual
What this Chapter Contains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Parameter Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
To which Products this Manual Applies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
ISU-related Information in Other Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter 2 – Operation Basics
Operation of ISU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Main Circuit Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Voltage and Current Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Spectrum of the Voltage DIstortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Spectrum of the Line Current Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Chapter 3 – Hardware Description
Main Components of a Drive with ISU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
ACA 635 IGBT Supply Sections User’s Manual vii
Supply Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Auxiliary Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Incoming Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Filter Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IGBT Supply Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Main Circuit Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Basic Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Parallel Connected Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Braking Chopper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Chapter 4 – Commissioning the Supply Section with ISU
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Checks with No Voltage Connected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connecting Voltage to Auxiliary Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Checks with Voltage Connected to Auxiliary Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Connecting Voltage to IGBT Supply Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Checks with ISU Supply Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Controlling the ISU with an Overriding System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Fieldbus Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
On-load Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 5 – Earth Fault Protection
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Floating Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Insulation Monitoring Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
System-earthed Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter 6 – Firmware Description
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Control Principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Identification Routine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Starting Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Start by the Starting Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Start via Fieldbus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Missing Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Control Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
DC Voltage Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Reactive Power Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
viii ACA 635 IGBT Supply Sections User’s Manual
Chapter 7 – Fault Tracing
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Fault Tracing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Fault Resetting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Fault History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Fault and Warning Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
What to Do in Case of an Earth Fault Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Chapter 8 – Parameters
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1 Actual Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2 Actual Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3 Actual Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
4 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
7 Control Word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
8 Status Word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
9 Fault Words . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
11 Reference Selects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
13 Analogue Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
14 Digital Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
15 Analogue Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
16 System Control Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
18 LED Panel Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
19 Data Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Trend Monitoring with Drive Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Sending a value. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
19 Data Storage Parameter Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
21 Start/Stop Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
23 DC Bus Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
24 Reactive Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
30 Fault Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
51 Communication Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
70 DDCS Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
71 DriveBus Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
90, 91 Data Set Receive Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
92, 93 Data Set Transmit Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
98 Option Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
99 Start-up Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Appendix A – Technical Data
Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Ratings 380...690 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Dimensions and Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
ACA 635 IGBT Supply Sections User’s Manual ix
Input Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Harmonic Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Switching Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Ambient Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
IGBT Supply Section AC Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
IGBT Supply Unit DC Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Power Cable Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Tightening Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
IGBT Supply Sections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Drive Control Unit NDCU-51 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
NIOC Board Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
NIOC Board Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Drive Control Unit RDCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Motor Control and I/O board RMIO-01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
RMIO board specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Applicable Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
CE Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Compliance with the EMC Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Machinery Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Appendix B – Circuit Diagrams
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
x ACA 635 IGBT Supply Sections User’s Manual
Update Notice for
ACA 635 IGBT Supply Sections 260 to 4728 kVA
ACS 800-17 Line-side Converter 120 to 1385 kVA
The notice concerns The translation (DE revision C) of the ACA 635 IGBT Supply Sections
260 to 4728 kVA, ACS 800-17 Line-side Converter 120 to 1385 kVA
User’s Manual: code 3BFE 64495062
The notice is in use from 28.07.2003
The notice contains Updates to the REV C translation.
ACS 800-17 Line-side CHANGED: ACS/ACC 617 line-side converter has been replaced by
Converter the ACS 800-17 line-side converter.
Chapter 1 - About this Page 1-2, User Interface CHANGED: The user interface of the IGBT
Manual Supply Unit is a CDP 312 Control Panel or a PC, which is equipped
with a DDCS board and DriveWindow.
Chapter 2 - Operation Page 2-3 CHANGED: Voltage and current distortion
Basics
Spectrum of the Voltage Distortion
2
1,5
1
0,5
0
THD 11 21 31 41 51 61 71 81 91 101 111 121 131 141 151 161 171 181 191
Update notice 1
Update Notice
Spectrum of the Current Distortion
4
3,5
3
2,5
2
1,5
1
0,5
0
THD 11 21 31 41 51 61 71 81 91 101 111 121 131 141 151 161 171 181 191
Chapter 3 - Hardware Page 3-2, Incoming Unit CHANGED: Frames R6i to R9i: switch fuse
Description (including AC fuses) and main contactor. Frames R11i and above: air
circuit breaker.
Page 3-3 CHANGED: Current and voltage distortion
Current Distortion (up to 200th) Generated by the Supply Unit at
PCC (Point of Common Coupling)
5
4.5
4
Current THD [%]
3.5
3
2.5
2
1.5
1
0.5
0
0 10 20 30 40 50 60 70 80 90 100
Rsc (Short-circuit Ratio) at PCC
2 Update notice
Update Notice
Voltage Distortion (up to 200th) Generated by the Supply Unit at
PCC (Point of Common Coupling)
5
4
Voltage THD [%]
3
2
1
0
0 10 20 30 40 50 60 70 80 90 100
Rsc (Short-circuit Ratio) at PCC
Page 3-5 Basic Configuration CHANGED:
The hardware of the IGBT supply unit is similar to the hardware of the
ACS 600 MultiDrive inverter. One NAMC/RMIO board controls the
converter module. It is l


Use: 0.0651