• LED-TECH.DE Coolers

LED-TECH.DE Coolers
 Site 2
Heat Sink / Mounting Plate for 1x LED
This plate is very adequate for own applications with high power LEDs. We use this
plate in addaption with Luxeon 1W star LEDs. The 4 round notches are for optional
replacement lenses for individual viewing angle which you can find in this shop
category, too.
Part Number: LT-0662
Diameter: 29.0mm
Housing Color: alu-silver
 Site 3
Heat Sink for LT-663
This heat sink with a 3mm center drill hole is made to be used with the 1-3x LED
circuit board LT-663 mounted with 1W LEDs. If you use 3W or 4W LEDs please use
our massive aluminium cooling element LT-665.
Part Number: LT-0664
Diameter: 43.0mm
Housing Color: alu-silver
 Site 4
Massive Cooling Element for LT-663
This massive aluminium cooling element offers adequate heat conduction for your
own applications with common high power LEDs.
It has a 3mm center drill hole to be mounted to LED circuit board LT-663 and it has
two further 3mm drill holes beside the center drill hole to screw star LEDs on top or to
pass through possible connection cables the the rear side.
Please find below the inovations of the new version:
Part Number: LT-0665
Diameter: 44.0mm - Aluminium with better heat conductance value
Housing Color: black - Complex surface treatment and anodized surface
- More surface area because of 8 cooling fins (instead of formely 6)
- With 35mm exactly 1cm shorter than the old version but more efficiant
- 3x 3mm drill holes for more design flexibility
- Deeper notches on the edge for taller optices with longer stand-offs
- 2 instead of formerly only 1 side notch for passing cables to the back side
Weight: 100g
 Site 5
Heat Sink Special Edition blue anodised
We now offer a full range of smallest heat sinks for better heat conductive conditions
in your high power LED applications.
Only a durable and consistant heat management will cause a long lifetime of the LED.
Technical Data:
- Weight: ~1,2g
Part Number: LT-0774 - Material: Aluminium
Housing Color: blue - Dimensions: (WxHxD) 13x13x6mm
 Site 6
Massive Cooling Element for LT-662
This massive aluminium cooling element offers adequate heat conduction for your
own applications with common 1W, 3W, 5W and other high power (star) LEDs.
We offer this cooler in 5cm length so that you can easily shorten it for your own
application or directly manufacturer a few smaller cooling elements out of it. The
possibillities of use are so versatile like beside mentioned picture galery shows:
Example 1: The cooler also fits very well (maybe in shortened form) right behind a
Part Number: LT-0888 standart star LED. The half-round notches of the star heat sink are not affected in any
Diameter: 20.0mm way.
Housing Color: alu-silver
Example 2: The cooler also fits very well right behind the assembly housings LT-885
and LT-886 to improve the heat conduction.
Example 3: The cooler fits very well to the circuit board LT-662, which can be
assembled with a star LED.Remark: Please always use a high quality heat conductive
glue.
Weight: 28g
 Site 7
Heat Sink for 10mm PCBs (by the meter)
Sold by the meter
We offer this special heat sink for better heat conductive conditions in your high power
LED applications and PCBs. This 1m cut has excellent heat conductive attributes and
perfect look of course.
Because of the special cavity 10mm PCBs like our 1cm Rebel PCB-stripes fit exactly
onto this cooler. The middle cooling fins also offer the possibilty to fix the whole cooler
Part Number: LT-1205 with small screws. Lamp designers of this individually shortenable cooler will
Housing Color: alu-silver appreciate this.
Only a durable and consistant heat management will cause a long lifetime of the LED.
Technical Data:
- Weight: ~100g
- Material: Aluminium
- Dimensions: (WxHxD) 12x6x1000mm
- Heat conductive value: 25K/W
Technical remark:
Well useable with the MultiLine Aluminium PCBs LT-938 as well as the aluminium
Rebel PCBs.
 Site 8
Spike Heat Sink 10x10mm
We offer this special heat sink for better heat conductive conditions in your high power
LED applications and PCBs. This cooler has excellent heat conductive attributes
because of its backside spikes. Those have a gathered surface higher than ever
common cooler could have.
Only a durable and consistant heat management will cause a long lifetime of the LED.
Technical Data:
Part Number: LT-1318
Housing Color: alu-silver - Weight: ~1,3g
- Material: Aluminium
- Dimensions: (WxDxH) 10x10x12,5mm
Technic remark:
This cooler is perfect for the 10x10mm Rebel PCBs.
 Site 9
Spike Heat Sink 25x25mm
We offer this special heat sink for better heat conductive conditions in your high power
LED applications and PCBs. This cooler has excellent heat conductive attributes
because of its backside spikes. Those have a gathered surface higher than ever
common cooler could have.
Only a durable and consistant heat management will cause a long lifetime of the LED.
Technical Data:
Part Number: LT-1319
Housing Color: alu-silver - Weight: ~7g
- Material: Aluminium
- Dimensions: (WxDxH) 10x10x12,5mm
Technic remark:
This cooler is perfect in addition to Seoul P5 on PCB as well as all common star LEDs.
 Site 10
Spike Heat Sink round 40mm
We offer this special heat sink for better heat conductive conditions in your high power
LED applications and PCBs. This cooler has excellent heat conductive attributes
because of its backside spikes. Those have a gathered surface higher than ever
common cooler could have.
Only a durable and consistant heat management will cause a long lifetime of the LED.
Technical Data:
Part Number: LT-1320
Diameter: 40.0mm - Weight: ~22g
Housing Color: alu-silver - Material: Aluminium
- Diameter: 40mm
- Height: 20mm
Technic remark:
This cooler is perfect to cool PCBs like our LT-663 which is used for user defined LED
applications and plug & light kits. A further advantage is its width of only 40mm
which allows it to fit through every MR16 assembly ring (50mm).
 Site 11
Spike Heat Sink round 40mm
We offer this special heat sink for better heat conductive conditions in your high power
LED applications and PCBs. This cooler has excellent heat conductive attributes
because of its backside spikes. Those have a gathered surface higher than ever
common cooler could have.
Only a durable and consistant heat management will cause a long lifetime of the LED.
Technical Data:
Part Number: LT-1383
Diameter: 40.0mm - Weight: ~29,24g
Housing Color: alu-silver - Material: Aluminium
- Diameter: 40mm
- Height: 30mm
Technic remark:
This cooler is perfect to cool PCBs like our LT-663 which is used for user defined LED
applications and plug & light kits. A further advantage is its width of only 40mm
which allows it to fit through every MR16 assembly ring (50mm).
 Site 12
Spike Heat Sink round 28.5mm
We offer this special heat sink for better heat conductive conditions in your high power
LED applications and PCBs. This cooler has excellent heat conductive attributes
because of its backside spikes. Those have a gathered surface higher than ever
common cooler could have.
Only a durable and consistant heat management will cause a long lifetime of the LED.
Technical Data:
Part Number: LT-1384
Diameter: 28.5mm - Weight: ~29,24g
Housing Color: alu-silver - Material: Aluminium
- Diameter: 40mm
- Height: 30mm
Technic remark:
This cooler is perfect to cool PCBs like Seoul P4 Star which is used for user defined
LED applications and plug & light kits.
 Site 13
Spike Heat Sink round 70mm
We offer this special heat sink for better heat conductive conditions in your high power
LED applications and PCBs.
Only a durable and consistant heat management will cause a long lifetime of the LED.
Technical Data:
Part Number: LT-1389
Diameter: 70.0mm - Thermal resistance: 4K/W
Housing Color: alu-silver - Thermal conductivity: 200W/mK
- Material: Aluminium
- Diameter: 70mm
- Height: 10mm
 Site 14
Spike Heat Sink 51x51mm
We offer this special heat sink for better heat conductive conditions in your high power
LED applications and PCBs.
Only a durable and consistant heat management will cause a long lifetime of the LED.
Technical Data:
Part Number: LT-1461
Housing Color: alu-silver - Thermal resistance: 4,5K/W
- Thermal conductivity: 150W/mK
- Material: Aluminium
- Dimensions (W/D/H): 51x51x10mm
 Site 15
Spike Heat Sink round 32.5mm
We offer this special heat sink for better heat conductive conditions in your high power
LED applications and PCBs. This cooler has excellent heat conductive attributes
because of its backside spikes. Those have a gathered surface higher than ever
common cooler could have.
Only a durable and consistant heat management will cause a long lifetime of the LED.
Technical Data:
Part Number: LT-1539
Diameter: 32.5mm - Weight: ~13,8g
Housing Color: alu-silver - Material: Aluminium
- Diameter: 32,5mm
- Height: 20mm
Technic remark:
This cooler is perfect to cool PCBs like Seoul P4 Star which is used for user defined
LED applications and plug & light kits.
 Site 16
Massive Cooling Element
We offer this special heat sink for better heat conductive conditions in your high power
LED applications and PCBs.
Only a durable and consistant heat management will cause a long lifetime of the LED.
Technical Data:
- Material: Aluminium
Part Number: LT-1594 - Diameter: 60,6mm
Diameter: 60.6mm - Height: 50mm
Housing Color: alu-silver - Thermal resistor: 1,4 Rth [K/W]
 Site 17
Massive Cooling Element
We offer this special heat sink for better heat conductive conditions in your high power
LED applications and PCBs.
Only a durable and consistant heat management will cause a long lifetime of the LED.
Technical Data:
- Material: Aluminium
Part Number: LT-1595 - Diameter: 50,0mm
Diameter: 50.0mm - Height: 50mm
Housing Color: alu-silver - Thermal resistor: 1,7 Rth [K/W]
 Site 18
SynJet® MR16 LED Cooler
The SynJet System from Nuventix is based on a synthetic pipe cooler. An oszillating
membrane with 30-200 impulses per second causes little air blasts that are forwarded
to the cooler by an internal jet system.
These very fast and also very small air blasts cause turbulances and benefit the heat
transfer from the cooler to the ambient air. Because of not neccessary components
like bearings the lifetime is very high and the noise development very low. Further
driver electronics can be mounted on the rear side.
Part Number: LT-1696
Diameter: 50.80mm The advantages of SynJet modules:
Housing Color: black Low power consumptionVery low noise development (22 dBA)High thermal efficiancy
V typ.: 4.75 V (up to 15W can be cooled with this configuration easily)High lifetime (100.000h)MR16
V max.: 5.25 V diameter, ideal for own applications
 Site 19
SynJet® PAR38 LED Cooler
The SynJet System from Nuventix is based on a synthetic pipe cooler. An oszillating
membrane with 30-200 impulses per second causes little air blasts that are forwarded
to the cooler by an internal jet system.
These very fast and also very small air blasts cause turbulances and benefit the heat
transfer from the cooler to the ambient air. Because of not neccessary components
like bearings the lifetime is very high and the noise development very low. Further
driver electronics can be mounted on the rear side.
Part Number: LT-1697
Diameter: 135.00mm The advantages of SynJet modules:
Housing Color: black Low power consumptionVery low noise development (22 dBA)High thermal efficiancy
V typ.: 4.75 V (up to 40W can be cooled with this configuration easily)High lifetime (100.000h)PAR38
V max.: 5.25 V diameter, ideal for own applications
 Site 20
Imprint
LED-TECH.DE optoelectronics Showroom
Director: Stefan Lenz
Am Schürmannshütt 38B
D-47441 Moers
Phone: (+49) 2841 / 97 91 7-0
Fax: (+49) 2841 / 97 91 7-29
Further we want to point at pictures, graphics and descriptions as well as the
pagelayout itself which are all subject to copyright. Every offence will be
prosecuted.
All mentioned prices are to be understood as gross prices including the value
added tax (TAV). All offers are subject to prior sales and without commitment.
Delivery times are to be understood from date of receipt of order. Mistakes
and changes in prices are always reserved.
 Seite 21
Notizen