• ANWIN ENTERPRISES (TAIWAN) CO., LTD.


  •   
  • FileName: naya epoxy resin_new(10.30.2009).pdf [read-online]
    • Abstract: Nan Ya, the leading global Epoxy Resin manufacturer,started to manufacture high quality epoxy resins since 1988.During the past ... D. NPES SERIES : BPA based medium or high M.W solid epoxy resins ...

Download the ebook

ANWIN ENTERPRISES (TAIWAN) CO., LTD.
Tel: 886-2-2717-3068 Fax: 886-2-2717-3998 E-mail: [email protected]
Nan Ya, the leading global Epoxy Resin manufacturer,started to manufacture high quality epoxy resins since 1988.During the past
two decades, the annual capacity has expanded to more than 300,000 MT in 2008.
Nan Ya Epoxy keeps focus on R&D and technology improvements,and are able to provide high quality and environmental-friendly
products to meet nearly any application. Nan Ya Epoxy passed ISO-9002 , ISO-14001 and Sony Green partner Certificate.
As a member of Formosa Plastic Group,Nan Ya Epoxy also takes advantage of internal sourcing channels within Formosa Plastic
Group to ensure high quality, sufficient and on-time BPA and ECH supplies.
Nan Ya Epoxy offers the following categories of epoxy resins:
A. NPEL SERIES:BPA based liquid Epoxy Resins
B. NPEF SERIES:BPF based, BPA /BPF blended epoxy resins
C. NPEK SERIES:Epoxy reactive diluent diluted liquid epoxy resins
D. NPES SERIES:BPA based medium or high M.W solid epoxy resins
E. NPSN SERIES:Liquid or solid epoxy resin solutions in organic solvent
F. NPPN SERIES:Phenol novolac solid epoxy resins and epoxy resin solutions in organic solvent
G. NPCN SERIES:Cresol novolac epoxy resins
H. NPEB SERIES:Brominated Epoxy Resins with different bromine content.
I. NPER SERIES:Dimer acid/Elastormer modified flexible epoxy resins.
J. NPEC SERIES:Epoxy resins for castings
K. NPEW SERIES:Waterborne epoxy resins
L. NPEP SERIES:Phosphorous epoxy resins for halogen free flame retardancy.
M. NPEH SERIES:Phenol or BPA based novolac resins.
1
ANWIN ENTERPRISES (TAIWAN) CO., LTD.
Tel: 886-2-2717-3068 Fax: 886-2-2717-3998 E-mail: [email protected]
A. NPEL SERIES : BPA based liquid epoxy resins
The most common low M.W epoxy resins produced by Biphenol A and epichlorohydrin in different ratios. Primarily used in low VOC,high solid
and solvent-free indusrial coatings,flooring, adhesives,casting and tooling ,potting and encapsulation, ,electric laminates,composites, and civil
engineering etc.,
TRADE NAME EEW Viscosity Color
(g/eq) (cps@25 ℃)1 (Gardner) Comments
NPEL-127 176~184 8000~11000 1.0 MAX. Standard BPA type resin, low viscosity
NPEL-127E 176~184 8000~11000 1.0 MAX Standard BPA type resin for electronic grade, low viscosity
NPEL-127H 182~188 10000~12000 1.0 MAX. Standard BPA type resin, low viscosity
NPEL-128 184~190 12000~15000 1.0 MAX Standard BPA type resin
NPEL-128E 184~190 12000~15000 1.0 MAX. Standard BPA type for electronic grade
NPEL-128R 184~194 12000~16000 1.0 MAX. Less-crystallizable, suitable for flooring and adhesives
NPEL-128S 205~225 19000~24000 1.0 MAX. Non-crystallizable resin
NPEL-134 230~270 O~U* 1.0MAX. Semi-solid, suitable for adhesives and laminates
NPEL-136 300~330 X~Z2* 1.0 MAX. Similar to NPEL-134, higher Mw and viscosity
NPEL-231 184~194 --- 1.0 MAX Precatalyzed, standard BPA type resin
(1)
Gardner-Holdt method (70%NV of butyl carbital solution)
2
ANWIN ENTERPRISES (TAIWAN) CO., LTD.
Tel: 886-2-2717-3068 Fax: 886-2-2717-3998 E-mail: [email protected]
B. NPEF SERIES: BPF type and BPA/BPF blend type
NPEF and BPA/BPF series are lower viscosity, enhanced crystallization resistance liquid epoxies over that BPA based epoxies. They provide
better workability and storage stability in formulation and reduce the handling costs.Primarily suitable for use in adhesives, laminates,
composites, civil engineering and low VOC protective paints.
TRADE NAME EEW Viscosity Color Comments
(g/eq) (cps@25 ℃) (Gardner)
NPEF-164X 185~205 700~1100 3.0 MAX. BPA/BPF/Reactive Diluent blended type
NPEF-170 160~180 2000~5000 3.0 MAX. Standard BPF type resin
NPEF-175 160~180 2000~5000 3.0 MAX. BPA/BPF blended type
NPEF-176 170~190 3000~5000 3.0 MAX. BPA/BPF blended type
NPEF-185 170~190 6000~8000 3.0 MAX. BPA/BPF blended type
NPEF-187 175~185 7500~9500 3.0 MAX. BPA/BPF blended type
NPEF-198 180~186 10000~14000 1.0 MAX. BPA/BPF blended type
NPEF-500 164~170 400~600 2.0 MAX. BPA/BPF/Diluent blended type
3
ANWIN ENTERPRISES (TAIWAN) CO., LTD.
Tel: 886-2-2717-3068 Fax: 886-2-2717-3998 E-mail: [email protected]
C. NPEK SERIES: Epoxy reactine diluent diluted liquid epoxy resins
BPA base or BPA/ BPF blend epoxy resins modified by gylcidyl ether reactive diluents ,lower resin viscosity ,crystallization resistant, good flow
and leveling ,high filler loading and good wetting of reinforcements and substrstes , NPEK series are designed primarily for solvent-free
industrial coatings,flooring, casting, potting and encapsulation ,civil engineering and some specialy for infusion and injection processes for
fiber reinforced plastic moldings.
TRADE NAME EEW Viscosity Color
(g/eq) (cps@25 ℃) (Gardner) Comments
NPEK-110 176~186 1400~2400 1.0 MAX. Butyl Glycidyl Ether diluted type
NPEK-114 190~210 600~1200 1.0 MAX. C12~C14 Aliphatic Glycidyl Ether diluted type
NPEK-114L 195~205 550~750 1.0 MAX. C12~C14 Aliphatic Glycidyl Ether diluted type
NPEK-114M 188~199 2100~2500 1.0 MAX. C12~C14 Aliphatic Glycidyl Ether diluted type
NPEK-114H 184~194 5100~5700 1.0 MAX. C12~C14 Aliphatic Glycidyl Ether diluted type
NPEK-114T 185~205 1500~2100 1.0 MAX. C12~C14 Aliphatic Glycidyl Ether diluted type
NPEK-115 175~195 600~1200 1.0 MAX. Butyl Glycidyl Ether diluted type
NPEK-116 180~200 600~1200 1.0 MAX. C12~C14 Aliphatic Glycidyl Ether/ Neopentyl Diglycidyl ether diluted type
NPEK-117 180~190 1500~3500 1.0 MAX. Butyl Glycidyl Ether diluted type
NPEK-139 180~220 1500~2100 3.0 MAX. C10 Glycidyl Ester diluted type
NPEK-257 182~192 400~600 3.0 MAX. Cresly Glycidyl Ether diluted type
NPEK-279 195~208 1000~1700 2.0 MAX. 2-ethyl Hexyl Glycidyl Ether diluted type
4
ANWIN ENTERPRISES (TAIWAN) CO., LTD.
Tel: 886-2-2717-3068 Fax: 886-2-2717-3998 E-mail: [email protected]
D. NPES SERIES : BPA based medium or high M.W solid epoxy resins
(a) Medium Molecular Weight Epoxy Resin
NPES-900 series are manufactured by advanced method with BPA and "standard" liquid BPA type epoxy resin in different ratios and are mainly
used for vinyl ester synthesis ,powder coatings, laminates, epoxy ester synthesis, marine and protective coatings,
(1) HIGH PURITY SOLID EPOXY
EEW Solution Melt Soft Point Color
TRADE NAME (g/eq) Viscosity Viscosity (℃) (Gardner) Comments
(@25℃)1 (cps@150℃)2
NPES-901 450~500 D~F --- 64~74 1.0 MAX. For vinyl ester, CFRP, paints
NPES-901H 580~610 I~L --- 80~85 1.0 MAX. For vinyl ester, CFRP, paints
NPES-902 600~650 I~M --- 82~92 1.0 MAX. For coatings
NPES-902H 680~710 K~P 2000~4500 90~95 1.0 MAX. For coatings
NPES-903 700~750 N~R 3000~5000 90~98 1.0 MAX. For powder coatings
NPES-903H 740~780 P~S 3500~6000 92~100 1.0 MAX. For powder coatings
NPES-903K 670~700 K~P 2000~4000 88~95 1.0 MAX. For powder coatings
NPES-904 780~850 S~W 4500~8000 96~107 1.0 MAX For powder coatings and epoxy ester
NPES-904H 840~900 V~X 6000~9000 100~112 1.0 MAX. For powder coatings and epoxy ester
NPES-905L 900~930 --- --- 95~110 1.0 MAX. For powder coatings
NPES-904F 810~860 P~U 6500~9500 96~107 1.0 MAX. Precatalyzed for epoxy ester synthesis
(1.) (2)
N.V 40%. butyl carbitol solution. Viscosity measured by cone & plate viscometer at 150℃
5
(2). MASTER BATCH TYPE SILICONE FREE FLOW CONTROL AGENT MODIFIED EPOXY RESINS
Designed for used in pure epoxy and epoxy/polyester hybrid powder coatings to improve surface flow and levelling for decorative
applications.It facilitates homogeneous mixing in formulation and gives better consistency in final product.
TRADE NAME EEW Melt Soft
(g/eq) Viscosity Point Comments
(cps@ 150℃)1 (℃)
NPES-902P 700~750 1800~2800 85~95 For powder coating, with 2.5% flow agent, ,
NPES-903P 750~800 2000~3000 85~97 For powder coating, with 2.5% flow agent, ,
NPES-903L 830~930 750~1400 90~95 High flow for powder coating, with 2.5% flow agent,
NPES-904HP 910~950 8500~13000 98~107 For powder coating, with 0.5% flow agent
NPES-924 720~770 2000~3500 85~97 For powder coating, with 10% flow agent,Master batch
(1)
. Viscosity measured by cone & plate viscometer at 150℃
(3) HIGH FLOW EPOXY RESIN
Low melt viscosity, mainly used for solvent paints and decorative powder coatings with excellent flow and coating properties.
TRADE NAME EEW Solution Melt Viscosity Soft Point
(g/eq) Viscosity (cps@ 150℃)2 (℃) Comments
(25℃)1
NPES-601 510~570 G~I ---- 74~82 For paints
NPES-602 610~660 --- 600~1800 75~86 For powder coatings
NPES-602L 640~680 --- 1200~1600 79~85 For powder coatings
NPES-602H 660~720 --- 1700~2500 85~95 For powder coatings
NPES-603 720~770 --- 1500~3500 85~95 For powder coatings
NPES-604 800~850 --- 2500~6000 90~100 For powder coatings
NPES-605 900~950 --- 4000~8000 95~108 For powder coatings
(1). (2)
N.V 40%. butyl carbitol solution . Viscosity measured by cone & plate viscometer at 150℃
6
(4) SPECIAL MODIFIED MEDIUM MOLECULAR WEIGHT EPOXY RESIN
Solid epoxy resins modified by multifunction phenol novalac epoxy resin. They provide excellent coating properties such as adhesion,
mechanical strengh,thermal resistance,corrosion resistance and chemical resistance when properly formulated and are suitable for used in
pure epoxy powder coatings,epoxy/ polyester powder coatings and pipe coatings.
TRADE NAME EEW Melt Soft Point Color
(g/eq) Viscosity (℃) (Gardner) Comments
(cps@ 150℃)1
NPES-660U 500~560 4000~8000 90~98 2.0 MAX. Multifunction resin modified
NPES-661H 710~740 ---- 98~108 3.0 MAX. Multifunction resin modified
NPES-662H 750~850 ---- 110~120 2.0 MAX Multifunction resin modified for pipe coating
(1)
.Viscosity measured by cone & plate viscometer at 150℃
(b) High Molecular Weight Solid Type Epoxy Resin
Primarily for use in one pack stoving enamels in combination with heat-reactive cross-linking agents such as amino resin or phenol
formaldehyde resin, and are suitable for metal decoration, can coatings,PCM, tube and drum linings, coil coating primers,or some as flow
modifier in epoxy powder coatings.
(1). GENERAL SOLID EPOXY RESIN
TRADE NAME EEW Solution Viscosity Soft Point Color
(g/eq) (25℃)1 (℃) (Gardner) Comments
NPES-907 1500~1800 X~Z2 120~130 1.0 MAX. For can coatings
NPES-909 1800~2400 Z3~Z5 130~150 1.0 MAX. For can coatings and coil coatings
NPES-909H 2100~2500 Z3~Z5 135~150 1.0 MAX. For can coatings and coil coatings
1. 40% N.V, butyl carbitol solution
7
(2). HIGH FLOW EPOXY RESIN
Modified solid epoxy resins with higher flowability than NPES-900 series, suitable for used in formulating high solid type paints.
EEW Solution Soft Point Dilution
TRADE NAME (g/eq) Viscosity (℃) Viscosity Comments
1 2
(@25℃) (sec)
NPES-607 1650~1900 Y~Z1 120~135 --- For can coatings
NPES-627 1650~1900 Y~Z1 120~135 --- For can coatings
NPES-628 2000~2500 --- 130~140 26~36 Mw higher than NPES-627, for can coatings
NPES-629 2400~3000 --- 135~150 28~46 Flexible type, for can coating, more narrow MW distribution
NPES-619A 2400~3000 --- 135~150 28~36 Flexible type, for can coating, more narrow MW distribution
NPES-619B 2400~3000 --- 135~150 31~37 Flexible type, for can coating, more narrow MW distribution
NPES-619C 2400~3000 --- 135~150 33~43 Flexible type, for can coating,more narrow MW distribution
NPES-619D 2400~3000 --- 135~150 39~46 Flexible type, for can coating,more narrow M.W distribution
NPES-619E 2600~3300 --- 135~150 45~52 Flexible type, for can coating,more narrow MW distribution
NPES-669 2900~3300 --- 135~150 39~46 Flexible type, for can coating,more narrow MW distribution
(1)
.40% N.V, in butyl carbitol solution. .(2). Ford #4 cup: 25%N.V in PMA solution.
8
ANWIN ENTERPRISES (TAIWAN) CO., LTD.
Tel: 886-2-2717-3068 Fax: 886-2-2717-3998 E-mail: [email protected]
(c). Solid Epoxy Resin By Taffy Process.
NPES-300 series are solid epoxy resins suitable for used in tank lining ,marine,protective coatings, coal tar base coating,flooring ,
powder coatings and adhesives.
EEW Solution Soft Point Color
TRADE NAME (g/eq) Viscosity (℃) (Grdner)
(cps@25℃)1 Comments
NPES-301 450~500 D~G 60~70 1.0 MAX Type 1 taffy process for paints
NPES-303 800~900 O~S 90~105 1.0 MAX Type 3-taffy process for powder coatings
NPES-303L 720~760 M~R 85~94 1.0 MAX Type 3-taffy process for powder coatings
NPES-304 900~1000 Q~U 95~115 1.0 MAX Type 4-taffy process for powder coatings
NPES-307 1600~2000 --- 105~130 1.0 MAX Type 7- for can coatings
(1)
40%N.V,in butyl carbitol solution
9
ANWIN ENTERPRISES (TAIWAN) CO., LTD.
Tel: 886-2-2717-3068 Fax: 886-2-2717-3998 E-mail: [email protected]
E. NPSN SERIES:Liquid or solid epoxy resin solutions in organic solvent
1.Semi-solid Epoxy resin Solvent type
Semi-solid epoxy resin solutions dissolved in organic solvents for ease of handling and processing in applications such as coatings,
civil engineerings and adhesives,etc..
TRADE NAME EEW Viscosity N.V Color
(g/eq)1 (cps@25 ℃)2 (%) (Gardner) Comments
NPSN-134X80 230~270 800~1400 79± 1 1.0 MAX. 20% Xylene Varnish
NPSN-134X85 230~270 2000~5000 85± 1 1.0 MAX. 15% Xylene Varnish
NPSN-134X90 230~270 10000~30000 90± 1 1.0 MAX. 10% Xylene Varnish
NPSN-136X80 300~330 3000~7000 80± 1 1.0 MAX. 20% Xylene Varnish
NPSN-136X66 300~330 200~400 66± 1 1.0 MAX. 34% Xylene Varnish
1 2
.based on solid. .Brookfield viscosity.
10
2. Solid Epoxy resin Solvent type
Solid epoxy resin solutions dissolved in various organic solvents to provide low viscosities and better workability ,primarily for use in marine
and protective coatings.
EEW Viscosity Non volatility Color
TRADE NAME
(g/eq)1 (25℃)2 (%) (Gardner) Comments
NPSN-901X65 450~500 1000~1800 64~66 1.0 MAX. 35% Xylene Varnish
NPSN-901X75 450~500 8000~15000 74~76 1.0 MAX. 25% Xylene Varnish
NPSN-901S75 450~500 13000~25000 74~76 1.0 MAX. 25% BCS Varnish
NPSN-901K80 450~500 4000~13000 79~81 1.0 MAX. 20% MEK Varnish
NPSN-900X75 450~500 2500~4500 74~76 2.0 MAX. 25% Xylene Varnish
NPSN-902X70 600~650 8000~18000 69~71 1.0 MAX. 30% Xylene Varnish
NPSN-902X75 600~650 20000~50000 74~76 1.0 MAX. 25% Xylene Varnish
NPSN-901H75 450~500 8000~15000 74~76 1.0 MAX 25% Xylene Varnish.
good wetting for high filler
(1) (2)
based on solid. .Brookfield viscosity.
3. HIGH PURITY SOLVENT EPOXY RESIN
Solid epoxy resin solutions in organic solvents to providing low viscosities and better workability in formulating and processing ,primarily
used in protective coatings, marine paints and varnishes.
TRADE NAME EEW Viscosity Non volatility Color
(g/eq)1 (25℃)2 (%) (Gardner) Comments
NPSN-907BM50 1500~ 1800 2000~ 8000 49~51 1.0 MAX. In BCS/XYL. Varnish
(1) (2).
.based on solid. Brookfield viscosity.
11
ANWIN ENTERPRISES (TAIWAN) CO., LTD.
Tel: 886-2-2717-3068 Fax: 886-2-2717-3998 E-mail: [email protected]
4. HIGH MOLECULAR WEIGHT HIGH FLOW EPOXY RESIN SOLUTION
TRADE NAME EEW Viscosity Non Color
(g/eq)1 (cps@25℃)2 volatility (Grdner) Comments
(%)
NPSN-608BM50 2000~ 2500 3000~6500 49~51 1.0 MAX. BCS/XYL varnish
NPSN-609BM50 2400~3000 4000~11000 49~51 1.0 MAX. BCS/XYL varnish
NPSN-609BM51 2400~3000 4000~12000 50~51 1.0 MAX. BCS/XYL varnish
3000~7000
NPSN-610BM50 2400~ 3000 48~50 1.0 MAX. BCS/XYL varnish
(@30℃)
(1) (2)
.based on solid. .Brookfield viscosmeter
5. Solid Epoxy Resin Solvent Type
EEW Solution Non Color
TRADE NAME (g/eq)1 Viscosity volatility (Gardner)
(cps@25℃)2 (%) Comments
NPSN-301X65 450~500 800~1700 64~66 1.0 MAX 35% Xylene Varnish
NPSN-301X75 450~500 6000~14000 74~76 1.0 MAX 25% Xylene Varnish
(1) (2)
.based on solid. .Brookfield viscosity
12
ANWIN ENTERPRISES (TAIWAN) CO., LTD.
Tel: 886-2-2717-3068 Fax: 886-2-2717-3998 E-mail: [email protected]
F. NPPN SERIES:Phenol Novolac Epoxy Resin
NPPN epoxy resins are mainly used in marine and protective coatings for rebar and pipe ,laminates, composites and civil engineering,
where higher corrosion/chemical and heat resistance is of prime importance.
1. GENERAL TYPE
TRADE NAME EEW Solution Viscosity Color
(g/eq) (25℃)2 (Gardner) Comments
NPPN-631 168~178 1100~17001 2.0 MAX. Low viscosity phenol novolac type
NPPN-638 170~190 H~K2 3.0 MAX. Standard phenol novolac type
NPPN-638S 170~190 H~J2 3.0 MAX. Standard phenol novolac type
(1) (2)
Brookfield viscometer method cps/52℃ 60% N.V,butyl carbitol solution
2.TETRA-FUNCTION NOVOLAC TYPE
A tetrafunctional glycidyl ether of tetraphenylol ethane epoxy resin. It is mainly used in electrical laminates, high performance composites, and
adhesive,in which higher heat distortion temperature,chemical resistance and UV-block are desired.
TRADE NAME EEW SOFT Color
(g/eq) POINT(℃) (Gardner) Comments
Tetrafunction resin, excellent for heat resistance and
NPPN- 431 200~240 82~92 9~13
UV block, used in CFRP, CCL
13
3. BISPHENOL-A NOVOLAC TYPE
TRADE NAME EEW SOFT Color
(g/eq) POINT(℃) (Gardner) Comments
NPPN- 438 190~210 60~68 2.0MAX. BPA-Novolac type epoxy used in CFRP, CCL
4. NOVOLAC SOLVENT TYPE
TRADE NAME EEW NON Color
(g/eq) VOLATILITY (Gardner) Comments
(%)
NPPN-431A70 200~240 69~71 9~13 Tetrafunction resin, excellent for heat resistance
and UV block. Acetone varnish
NPPN-638K80 170~190 79~81 3.0 MAX MEK varnish
NPPN-638S90 170~190 89~91 5.0 MAX BCS varnish
NPPN-638X80 170~190 89~91 3.0 MAX XYL varnish
NPCN-704K80 200~230 79~81 5.0 MAX MEK varnish
NPPN-438A70 185~210 69~71 4.0 MAX BPA-Novolac type epoxy. Acetone varnish
NPPN-438A80 185~210 79~81 5.0 MAX BPA-Novolac type epoxy. Acetone varnish
NPPN-438K80 185~210 79~81 5.0 MAX BPA-Novolac type epoxy. MEK varnish
14
ANWIN ENTERPRISES (TAIWAN) CO., LTD.
Tel: 886-2-2717-3068 Fax: 886-2-2717-3998 E-mail: [email protected]
G. NPCN SERIES:Cresol novolac epoxy resins
NPCN SERIES exhibit better thermal stability and lower moisture adsorption than EPPNs, widely used in applications including as base
components of molding compounds for electronics,chemical resistance coatings,high temperature adhesives, heat resistant composites and
laminates, and resist ink, etc.
.
TRADE NAME EEW SOFT POINT Color
(g/eq) (℃) (Gardner) Comments
NPCN -701 190~215 60~64 3.0 MAX Adhesive
NPCN-702 190~215 65~74 3.0 MAX Adhesive & Powder coating
NPCN-703 195~225 75~85 3.0 MAX Transfer molding compound, for CFRP,CCL,Ink
NPCN-704 195~220 85~95 3.0 MAX Transfer molding compound, for CFRP,CCL,Ink
NPCN-704H 200~220 95~100 3.0 MAX Transfer molding compound, for CFRP,CCL,Ink
15
ANWIN ENTERPRISES (TAIWAN) CO., LTD.
Tel: 886-2-2717-3068 Fax: 886-2-2717-3998 E-mail: [email protected]
H. NPEB series: Brominated Type Epoxy Resins With Different Bromine Content.
NPEB series are manufactured through the reaction of tetrabromobisphenol-A and epichlorohydrin in diffent ratios,
and are suitable for use in applications where fire resistance are desired.
1. HIGH BROMINATED TYPE
Provide excellent flame retardancy because of high bromine content. Suitable for use in electrical moulding, laminates and
some as flame-retardant additive for engineering plastics applications.
TRADE NAME EEW SOFT POINT Bromine Content
(g/eq) (℃) (%) Comments
NPEB-340 330~380 46~64 46~50 Pure DGE-TBBA
NPEB-400 380~420 64~74 46~50 For paper laminates
NPEB-408 700~850 100~130 48~52 Flame-retardant for engineering plastics
1
NPEB-428 270~290 5000~6500 48~52 Flame-retardant for engineering plastics
(1) Viscosity in cps @ 65℃.
16
2. HIGH BROMINATED SOLVENT TYPE
TRADE NAME EEW Viscosity Non Bromine
(g/eq)1 (cps@25℃) 2 volatility Content Comments
(%) (%)
Toluene varnish, suitable as flame retardant
NPEB-400T60 380~420 5~30 59~61 46~50
for phenolic paper laminates
Toluene varnish, suitable as flame retardant
NPEB-400T80 380~420 --- 79~81 46~50
for phenolic paper laminates
Acetone varnish, suitable as flame retardant
NPEB-400A60 380~420 5~20 59~61 46~50
for copper clad laminates
3. END CAPPING HIGH BROMINATED TYPE
Medium molecular weight end-capped brominated resins. Exhibite excellent heat stability and workability,suitable for use as
flame-retardant additives in engineering plastics.
SOFT Bromine
TRADE NAME POINT Content Comments
(℃) (%)
Medium molecular weight, flame-retardant .For engineering plastics,
NPEB- 462 115~125 57~60
like ABS, nylon....etc.
17
4. LOW BROMINATED SOLVENT TYPE (DICY CURED SYSTEM)
Designed for combining with dicyanodiamide/ Imidazoles curing system, Mainly used in the manufacture of FR-4 and
multilayer laminates for PCB, and may also be used in molding compounds, and surface coatings, etc..
EEW Viscosity Non Bromine
TRADE NAME (g/eq) (cps @25℃) volatility Content Comments
(%) (%)
Standard brominated epoxy resin in acetone,
NPEB-450A80 410~440 800~1800 79~81 18~21
suitable for CCL
Modified brominated epoxy resin in acetone,
NPEB-454A80 425~455 1000~2600 79~81 18~21
suitable for UV-block property
Modified brominated epoxy resin in acetone,
NPEB-454HA80 425~455 1000~2600 79~81 18~21
suitable for UV-block property
Modified brominated epoxy resin in acetone,
NPEB-485A80 385~405 800~2000 79~81 18~21
suitable forTg150℃,UV-block ,CCL application
Modified brominated epoxy resin in acetone,
NPEB-487A80 355~375 1000~2500 79~81 14~17
suitable for Tg170℃, UV-block ,CCL application
18
5. LOW BROMINATED SOLVENT TYPE (PHENOL NOVOLAC CURED SYSTEM)
Designed to cure with phenol novolac curing system and offer higher Tg and excellent performance properties after proper
cured,primarily used in laminates,
EEW Viscosity Non Bromine
1
TRADE NAME (g/eq) (cps) volatility Content Comments
(25℃) (%) (%)
Higher Tg (140℃) and better copper foil peeling
NPEB-454XA80 385~405 800~1600 79~81 18~21
strength.NPEB-454XA80:NPEB-454XB35=100:35
Higher Tg (150℃) and better copper foil peeling
NPEB-485XA80 365~385 1000~3000 79~81 16~18
strength.NPEB-485XA80:NPEB-485XB45=100:43
Higher Tg (150℃) and good thermal, moisture
NPEB-475A70 295~335 100~700 69~71 14~16
resistance,combined with BPA novolac,TBBA..etc
NPEB-475A70:NPEB-475B60=100:60
Higher Tg (150℃) and good process window
NPEB-476A70 300~350 50~180 69~71 21~23
NPEB-476A70:NPEB-476B70=100:31.5
Higher Tg (150℃) and good thermal, moisture
NPEB-476NA70 295~325 30~150 69~71 20~22
resistance.NPEB-476NA70:NPEB-476NB70=100:35
IR spectrum same as FR-4 STD
Higher Tg (170℃) and good process window
NPEB-477A70 280~350 50~250 69~71 24~26
NPEB-477A70:NPEB-477B70=100:35
Higher Tg ( 170℃) and good thermal,moisture
NPEB-477NA70 250~270 1500~3000 69~71 22~24
resistance.NPEB-477NA70:NPEB-477NB70=100:41
IR spectrum same as FR-4 STD
19
ANWIN ENTERPRISES (TAIWAN) CO., LTD.
Tel: 886-2-2717-3068 Fax: 886-2-2717-3998 E-mail: [email protected]
I. NPER SERIES:Dimer Acid/Elastormer modified flexible epoxy resins.
NPER series are flexible epoxies modified by elastomers or dimeric acid,and provide improved toughness, adhesion properties, impact
resistance and low temperature flexibility over unmodified epoxies when formulated in adhesives, laminates, composites and coatings.
1. POLYURTHANE MODIFY TYPE
Polyurethane modified liquid epoxy resins mainly used in adhesives applications
TRADE NAME EEW Viscosity Color
(g/eq) (cps@25℃) (Gardner) Comments
NPER-133 195~240 20000~30000 1.0 MAX Flexible EPU modified, for use in adhesive
NPER-133L 195~240 10000~16000 1.0 MAX. Flexible EPU modified, for use in adhesive
2. DIMER ACID MODIFY TYPE
Manufactured through the reaction of liquid BPA epoxy and long chain dimer acid at high temperature to increase the miscibility of dimer acid
and epoxy resin.Mainly act as a modifier for the other epoxy resins used in adhesives, laminates ,coating


Use: 0.1295