• RAD Series Radiant Heater Mounting Methods

Process Air and Radiant
RAD Series
Radiant Heater
Mounting Methods
• Single Heater Mounting
• Flat Heater Banks
Flat Heater Banks
• Large Oven Sections
Continuous Slot Metal Framing Angle Iron Frame Conduit to Wireway
• Formed Ovens
Chromalox radiant heaters are inherently easy
to put to work. These heaters are designed as
heater modules with features that provide the
greatest flexibility in application. A broad
choice of physical lengths and ratings is Angle Iron & Channel Angle Iron & Chain
available. Modules can be locked together with
hinge-like connectors to create various shaped
tunnel structures. Rugged heater case permits
use with common structural materials as
PROCESS RADIANT
framing for heater banks using provided
heater mounting clamp.
Temperature controls, contactors, other
control equipment and wiring accessories can
be purchased with heaters to fill your electrical Formed Ovens
needs. Framing hardware and brackets must Angle Iron Frame & Aluminum Spacer Curved Strap Iron & Angle Iron
be obtained from your local supplier. Reflector
Single Heater Mounting
Standard Shelf Bracket
Formed Strap Iron Bolted to Machine Frame Curved Strap Iron & Aluminum Spacer
Reflector
Formed Iron Strap
DANGER — Hazard of Fire. Avoid direct
contact of heater case with any combustible
surface. Energized heaters should be spaced
so that no combustible surfaces exceed 194°F.
Large Oven Sections
Formed Angle Iron Frame Angle Iron Frame & Sheet Aluminum Walls
Threaded Rod
E-27
 Process Air and Radiant
LN & LW Series
Radiant Heater
Mounting Methods
• Single Heater Mounting Flat Heater Banks
Angle Iron Continuous Slot Metal Framing & Metal
• Flat Heater Banks
Wireway
• Large Oven Sections
• Formed Ovens
Stocked LN and LW oven sections, with built-
in air spaces for insulation and terminal block Angle Iron Angle Iron & Chain
for buss bar, will accept one, two or three
heating elements. Designed for use with
locally available hardware, they provide great
flexibility in radiant sources and housings, for
a single heater section or a complete oven.
Chromalox supplies oven sections, heating
elements, frame wireways, controls and wiring
accessories. Framing hardware and brackets Formed Ovens
must be obtained from your local supplier.
Angle Iron Frame & Strap Iron Bracket Curved Strap Iron & Angle Iron
Single Heater Mounting
Angle Iron Bracket
Formed Strap Iron Bolted to Machine Frame Angle Iron or Continuous Slot Framing
Formed Iron Strap
Large Oven Sections
Straight & Formed Angle Iron Angle Iron Frame, Strap Iron Brackets &
Threaded Rod & Continuous
Slot Metal Framing Sheet Aluminum Walls
DANGER — Hazard of Fire. Avoid direct contact of
heater case with any combustible surface. Energized
heaters should be spaced so that no combustible
surfaces exceed 194°F.
E-28