• American Designed and Quality Manufactured in Europe to International Standards

American Designed and Quality Manufactured in Europe to International Standards
13", 14", 15", 17", 20", 22" & 24" Swings
A Full Line of Quality Constructed
High Performance, Affordable, Soft Start and
Variable Speed Lathes, Designed for Your Production Needs...
CLAUSING/METOSA
The CLAUSING/METOSA 13" lathe, designed to give you years of trouble-free turning, will make a valuable
addition to your tool room or machine shop... Just Add Your Chuck and You’re Ready to Turn.
Headstock & Control Panel:
The 9 speed heavy-duty headstock is fully
geared. All gears are hardened and ground
and run in a continual bath of oil. Our main
spindle is made of forged, quenched and Carriage
tempered steel, with a case hardened spindle
& Apron:
nose and mounted on precision taper roller
bearings. The control panel is designed for Easy-to-operate
controls means
operator convenience and efficiency. increased productivity.
Easy-to-read dual inch
and metric dials,
and a quick change
Bed & tool post is standard
Micro Bedways: equipment on the
Carriage Stop: The extra wide 10" bed is
13" lathe.
For precision machining scientifically designed and
the Micro Carriage Stop constructed of stabilized
is standard on the 13"
cast iron with bedways Tailstock:
hardened and ground to a
lathe. hardness of 42 to 47 Rc. An extra heavy-duty
The bed is designed with casting for maximum
tapered cross braces for rigidity is equipped
4-Position fast and easy chip with a 1.9" ram
Bed Stop: removal. The bed is with 3MT taper. The
mounted on a rigid, tailstock ram is
The 4-Position Bed fabricated steel base that marked with a grad-
Stop is standard and is specially engineered to uated scale and the
allows fast and accurate absorb vibration and handwheel ring is
turning of multiple ensure smooth accurate indexed for accurate
lengths. operation. ram positioning.
Page 2
 13" GEARED HEAD LATHE
Specifications: 13" Standard Equipment:
Capacity • Dual Inch/Metric Dials
Swing over bed 13.2" • Dead Centers
Center height 6.5" • Q.C. Tool Post with 4 straight holders
Swing over carriage 12.20" • Steady Rest (1⁄2" - 41⁄2")
Swing over cross slide 6.89"
Bed Width 10" • Micro Carriage Stop
Headstock • 4-Position Bed Stop
Spindle bore 1.65" • Coolant System
Spindle nose D1-5 • One-Shot Lubrication
Spindle taper 4MT • Chuck Guard • Splash Guard
No. of speeds 9
Spindle speed range (rpm) 60-2000* • Leadscrew Cover
Thread and feed box • Thread Dial Indicator
No. of longitudinal feeds 44 • Drive Plate
Range (inches) 0.0018-0.026 • T-Slotted Top Slide
No. of cross feeds 44 • Electro-Magnetic Brake
Range (inches) 0.0005-0.0076
No. of Metric Threads 44 • Chip Pan • Tool Box & Manual
Range (mm) 0.5-7.5 Optional Equipment:
No. of Inch Threads 44
Range (t.p.i.) 4-60 • Face Plates
No. of modular threads 44 • Follower Rest (1⁄2" - 23⁄4")
Range 0.25-3.75 • Rear Tool Post
No. of diametral 44 • Round Tool Post
Range 8-120
Leadscrew dia./TPI 1.26"/4 • Live Center
Slides and carriage • Lathe Lamp
Cross slide travel 9.65" • Handwheel Collet Chuck
Top slide travel 4.72" • Lever Collet Chucks
Max. Tool Size 5/8" x 5/8" • Taper Attachment
Tailstock
Tailstock ram diameter 1.9" • Roller Fingers for Steady Rest
Tailstock ram travel 5.51" • ACU-RITE DRO
Tailstock taper 3MT
Motors *Spindle speed, (rpm)
Electrical:
Spindle motor (Hp) 3
60 - 115 - 175 - 275 - 450
*208v. / 230v. / 460v., 60Hz 3-phase
Pump motor (Hp) 3/4 Please specify voltage when ordering.
660 - 1,075 - 1,750 - 2,000
(specification subject to change without notification) * 208v is a special order or optional transformer required
Dimensions, Center Distance and Weight:
MODEL A B C CENTER DISTANCE WEIGHT
C1330S 50.5" 37.5" 74.8" 30" St. Bed 2170 lbs.
C1340S 50.5" 37.5" 85.4" 40" St. Bed 2290 lbs.
A
CLAUSING METOSA
C B
Recommended Chucks:
Spindle
Chuck Size Dia. Chuck
Atlas Easy-Set™ Universal 3-Jaw Scroll Chucks D1-5 6" EZ63D5
D1-5 8" EZ83D5
Atlas Easy-Set™ Universal 6-Jaw Scroll Chucks D1-5 6" EZ66D5
D1-5 8" EZ86D5
Atlas Medium Duty Iron Body 4-Jaw Independent Chucks D1-5 8" 0844-10D5
D1-5 10" 1044-10D5
Page 3
CLAUSING/METOSA
Put the versatility of the dependable CLAUSING/METOSA 14" Lathe in your machine shop and watch your
production increase year after year after year... Just Add Your Chuck and You’re Ready to Turn.
Headstock & Control Panel:
The 14" CLAUSING/METOSA Lathe is equipped
with a two-speed spindle drive motor that drives
a 9 speed, fully geared heavy-duty headstock
giving you a total of 18 spindle speeds. All
gears are hardened and ground and run in a
continual bath of oil. The spindle is made of
forged, quenched and tempered steel, with a
case hardened spindle nose and mounted on
precision taper roller bearings. The easy-to- Carriage
operate control panel is designed for efficiency. & Apron:
Controls are designed
for easy operation to
ensure maximum
productivity. Easy-to-
Micro Carriage read dual inch and
Stop: Bed & metric dials, and a
quick change tool
A standard feature on Bedways: post are standard
the 14" lathe, the
Micro Carriage Stop, The extra-wide equipment on the
allows accurate scientifically designed 14" lathe.
positioning of the bed, with tapered
carriage. cross braces for fast
and easy chip removal, Tailstock:
is constructed of A heavy-duty casting
stabilized cast iron
design for maximum
4-Position with bedways
hardened and ground rigidity to support
Bed Stop: to a hardness of work pieces or
42 to 47 Rc. tooling. The 1.9" ram,
The 4-Position Bed The bed is mounted with 3MT taper, has a
Stop allows fast and on a rigid, fabricated graduated
accurate turning of steel base that is scale and the
multiple length; a specially engineered handwheel ring is
standard feature on to absorb vibration indexed for accurate
the 14" lathe. and ensure smooth, ram positioning.
accurate operation.
Page 4
 14" GEARED HEAD LATHE
Specifications: 14" Standard Equipment:
Capacity • Dual Inch/Metric Dials
Swing over bed 14.17" • Dead Centers
Center height 7.1" • Q.C. Tool Post with 4 straight holders
Swing over gap 20.27" • Steady Rest (1⁄2" - 41⁄2")
Gap length in front of face plate 4.72"
Swing over carriage 13.2" • Micro Carriage Stop
Swing over cross slide 8.07" • 4-Position Bed Stop
Bed Width 10" • Coolant System
Headstock • One-Shot Lubrication
Spindle bore 1.65" • Chuck Guard • Splash Guard
Spindle nose D1-5
Spindle taper 4MT • Leadscrew Cover
No. of speeds (3 ranges in each motor speed) 18 • Thread Dial Indicator
Spindle speed range (rpm) 60-2000 • Drive Plate
Thread and feed box • T-Slotted Top Slide
No. of longitudinal feeds 44 • Electro-Magnetic Brake
Range (inches) 0.0018-0.026
No. of cross feeds 44 • Chip Pan • Tool Box & Manual
Range (inches) 0.0005-0.0076 Optional Equipment:
No. of Metric Threads 44
Range (mm) 0.5-7.5 • Face Plates
No. of Inch Threads 44 • Follower Rest (1⁄2" - 23⁄4")
Range (t.p.i.) 4-60 • Rear Tool Post • Round Tool Post
No. of modular threads 44 • Live Center • Lathe Lamp
Range 0.25-3.75
No. of diametral 44 • Handwheel Collet Chuck
Range 8-120 • Lever Collet Chucks
Leadscrew dia./TPI 1.26"/4 • Taper Attachment
Slides and carriage • Roller Fingers for Steady Rest
Cross slide travel 9.65" • ACU-RITE DRO
Top slide travel 4.72"
Max. Tool Size 3/4" x 3/4" Electrical:
Tailstock
Tailstock ram diameter 1.9" *208v. / 230v. / 460v., 60Hz 3-phase
Tailstock ram travel 5.51" Please specify voltage when ordering.
Tailstock taper 3MT *Spindle speed, (rpm)
* 208v is a special order or optional transformer required
Motors 30 - 46 - 60 -70 - 92 - 110 - 140
Spindle motor-2 speed (Hp) 3/4.5 180 - 220 - 265 - 360 - 430 - 530
Pump motor (Hp) 3/4
700 - 860 - 1000 - 1400 - 2000
(specification subject to change without notification)
Dimensions, Center Distance and Weight:
MODEL A B C CENTER DISTANCE WEIGHT
C1430S 50.5" 37.5" 74.8" 30" St. Bed 2220 lbs.
C1430 50.5" 37.5" 74.8" 30" Gab Bed 2220 lbs.
A
C1440S 50.5" 37.5" 85.4" 40" St. Bed 2328 lbs.
CLAUSING METOSA
C1440 50.5" 37.5" 85.4" 40" Gap Bed 2328 lbs.
C B
Recommended Chucks:
Spindle
Chuck Size Dia. Chuck
Atlas Easy-Set™ Universal 3-Jaw Scroll Chucks D1-5 6" EZ63D5
D1-5 8" EZ83D5
D1-5 10" EZ103D5
Atlas Easy-Set™ Universal 6-Jaw Scroll Chucks D1-5 6" EZ66D5
D1-5 8" EZ86D5
D1-5 10" EZ106D5
Atlas Medium Duty Iron Body 4-Jaw Independent Chucks D1-5 8" 0844-10D5
D1-5 10" 1044-10D5
Page 5
CLAUSING/METOSA
The CLAUSING/METOSA 15" or 17" Precision Geared Head Lathes with Soft Start and Variable Speed Lathes
will help increase your productivity and profits. The machines are designed with a heavy-duty cast iron base to
give you years of trouble-free production... Just Add Your Chuck and You’re Ready to Turn.
Heavy-duty
cast-iron base
construction on all
15" and 17" models
Carriage
& Apron:
Controls are designed
for safe and easy
operation. The 15" Bed &
and 17" lathes have Bedways: Micro
easy-to-read dual
The extra-wide 12"
Carriage
inch and metric dials
and are equipped bed is constructed of Stop:
with a quick change stabilized cast iron For precision
tool post. with bedways hard-
positioning the
ened and ground to a
hardness of 42 to 47 Micro Carriage
Rc. The scientifically Stop is a standard
Tailstock: designed bed has feature.
A heavy-duty casting tapered cross braces
design for maximum for fast and easy
rigidity with a 2.28" chip removal. The
4-Position
ram and a 4MT taper. bed is mounted on a Bed Stop:
The ram has a gradu- heavy-duty cast iron The 4-Position Bed
ated scale and the base that is specially
handwheel ring is Stop, a standard
engineered to absorb feature, allows fast
indexed for accurate vibration and ensure
ram positioning. positioning for
smooth accurate turning and cutting.
operation.
Page 6
 15" & 17" LATHES
Specification: 15" 15" 17" 17" Standard Equipment:
Soft Start Variable Speed Soft Start Variable Speed • Dual Inch/Metric Dials
Capacity • Dead Centers
Swing Over Bed 15.75" 15.75" 17.72" 17.72" • Q.C. Tool Post with 4 straight holders
Center height 7.87" 7.87" 8.86" 8.86"
Swing in gap 23.62" 23.62" 25.39" 25.39" • Steady Rest (1⁄2" - 5")
Gap length (in front of face plate) 6.30" 6.30 6.30 6.30 • Micro Carriage Stop
Swing over carriage 14.57" 14.57" 16.54" 16.54" • 4-Position Bed Stop
Swing over gross slide 8.26" 8.26" 10.28" 10.28" • Coolant System
Bed width 12" 12" 12" 12"
Headstock • One-Shot Lubrication
Spindle bore 2.05" 2.05" 2.05" 2.05" • Chuck Guard • Splash Guard
Spindle nose D1-6 D1-6 D1-6 D1-6 • Leadscrew Cover
Spindle taper 4MT 4MT 4MT 4MT
No. spindle speeds (Soft Start)* 12 - 12 - • Thread Dial Indicator
Spindle speed (rpm) 40-2200 0-2300 40-2200 0-2300 • Drive Plate
No. spindle speeds ranges V.S. 3 3 • T-Slotted Top Slide
Low speed range (rpm) 0-310 0-310 • Electro-Magnetic Spindle Brake
Medium speed range (rpm) 310-840 310-840
High speed range (rpm) 840-2300 840-2300 • Chip Pan
Thread and feed box • Tool Box & Manual
No. of longitudinal feeds 44 44 44 44
Range (inches) 0.0018-0.0026 0.0018-0.0026 0.0018-0.0026 0.0018-0.0026 Optional Equipment:
No. of cross feeds 44 44 44 44 • Face Plates • ACU-RITE DRO
Range (inches) 0.0005-.0.0076 0.0005-.0.0076 0.0005-.0.0076 0.0005-.0.0076
No. of metric threads 44 44 44 44 • Follower Rest (1⁄2" - 31⁄8")
Range (mm) 0.5-7.5 0.5-7.5 0.5-7.5 0.5-7.5 • Rear Tool Post
No. of inch threads 44 44 44 44 • Round Tool Post
Range 4-60 4-60 4-60 4-60
No. of modular thread 44 44 44 44
• Live Center • Lathe Lamp
Range 0.25-3.75 0.25-3.75 0.25-3.75 0.25-3.75 • Handwheel Collet Chuck
No. of diametral pitch threads 44 44 44 44 • Lever Collet Chuck
Range 8-120 8-120 8-120 8-120 • Taper Attachment
Leadscrew dia./TPI 1.26"/4 1.26"/4 1.26"/4 1.26"/4
Slide and carriage • Roller Fingers for Steady Rest
Cross slide travel 11.81" 11.81" 11.81" 11.81"
Compound travel 5.12" 5.12" 5.12" 5.12"
Electrical:
Max. tool size 1" x 1" 1" x 1" 1" x 1" 1" x 1" *208v. / 230v. / 460v., 60Hz 3-phase
Tailstock
Tailstock ram diameter 2.28" 2.28" 2.28" 2.28"
Please specify voltage when ordering.
Tailstock ram travel 6.1" 6.1" 6.1" 6.1" * 208v is a special order or optional transformer required
Tailstock taper 4MT 4MT 4MT 4MT
Motors *Spindle speed, (rpm)
Spindle motor (Hp) 7.5 7.5 7.5 7.5
Pump motor (Hp) 3/4 3/4 3/4 3/4
40 - 72 - 92 - 185 - 340 - 425 - 625
950 - 1,150 - 1,400 - 1,750 - 2,200
(specification subject to change
Dimensions, Center Distance and Weight: without notification)
MODEL A B C CENTER DISTANCE WEIGHT
C1545SS 54.3" 39" 93.7" 45" Gap Bed 2790 lbs.
C1545VS 54.3" 39" 93.7" 45" Gap Bed 2950 lbs.
C1565SS 54.3" 39" 113.4" 65" Gap Bed 3240 lbs.
A C1565VS 54.3" 39" 113.4" 65" Gap Bed 3409 lbs.
CLAUSING METOSA C1745SS 54.3" 39" 93.7" 45" Gap Bed 3275 lbs.
C1745VS 54.3" 39" 93.7" 45" Gap Bed 3440 lbs.
C1765SS 54.3" 39" 113.4" 65" Gap Bed 3720 lbs.
C B C1765VS 54.3" 39" 113.4" 65" Gap Bed 3890 lbs.
Recommended Chucks:
Lathe Spindle Chuck/
Chuck Size Size Dia. Mounting Plate No.
Atlas Easy-Set™ Universal 3-Jaw Scroll Chucks 15" & 17" D1-6 8" EZ83D6
15" & 17" D1-6 10" EZ103D6
17" D1-6 12" EZ123D6
Atlas Easy-Set™ Universal 6-Jaw Scroll Chucks 15" & 17" D1-6 8" EZ86D6
15" & 17" D1-6 10" EZ106D6
17" D1-6 12" EZ126D6
Atlas Medium Duty Iron Body 4-Jaw Independent Chucks 15" & 17" D1-6 10" 1044-20D6
15" & 17" D1-6 12" 1244-10D6
17" D1-6 16" 1644-10D6
Page 7
CLAUSING/METOSA
For your larger turning needs the CLAUSING/METOSA 20", 22" & 24" Variable Speed or Soft Start Precision Lathes
will be a real workhorse in your shop. The 22" Pipe Threading Lathe has an extra large spindle bore and lower
spindle speeds for threading, polishing and grinding. The machines are constructed with a heavy-duty cast iron
base to give you years of trouble free production... Just Add Your Chuck and You’re Ready to Turn.
Heavy-duty
cast-iron base
construction on all
20", 22" and 24"
models
Carriage
& Apron:
Safe and easy-to-
operate controls,
designed for operator
efficiency. The 20" 22" Bed & Micro
& 24" lathes are Bedways: Carriage
equipped with a quick
change tool post and The extra-wide 13-3/4" Stop:
the easy-to-read dual bed is scientifically For precision
inch and metric dials. designed with tapered cutting the Micro
cross braces for fast Carriage Stop is
and easy chip removal standard on the
and constructed of 20", 22" & 24" lathes.
Tailstock: stabilized cast iron
Extra heavy-duty cast- with bedways hard-
ing, for maximum ened and ground to a 4-Position
work support and hardness of 42 to 47
rigidity, with a 2.83" Rc. The bed is mount-
Bed Stop:
ram with 5MT taper.